Copper Products

Product Details:

Copper fittings are used in hot and cold water lines in plumbing systems when making connections to copper pipe. There are two basic types of copper pipe or tubing: rigid and flexible. Copper fittings can be used with both types of copper pipe. Rigid pipe is generally installed in new homes and provides a neater installation. Flexible copper pipe is best for repair work since it can be run around obstacles without connections or cuts.

Solder is required to securely connect a copper fitting to a copper pipe. Solder is a fusible metal alloy that, when melted, joins two or more metals together in a process known as soldering. The connections produced by solder are liquid and gas tight.

Copper fittings must be cleaned on the interior and exterior prior to being soldered. Soldering a copper fitting with debris on it will result in a poor seal. Using a Tu-Turn copper fitting brush will ensure a clean copper fitting.

Soldering paste or ''flux'' should be applied to a copper fitting after it has been cleaned. Flux will keep the copper from oxidizing when heated. This provides a firm bond between the copper and the solder. A quality soldering iron is needed to join the copper pipe and the fitting. Once the copper fitting has been properly prepared, it can be bonded to a copper pipe by using a quality soldering torch.

There are many different types of copper fittings, each serving a particular function.

Copper 45 & Copper 90 Degree Elbows are used to change the direction of the flow of water 45 or 90 degrees. These fittings are connected directly to a copper pipe.

Copper 45 & Copper 90 Street Elbows are also used to change the direction of the flow of water 45 or 90 degrees. Unlike a standard elbow, a street elbow is connected to a copper fitting.

Couplings are used to connect two pieces of copper pipe together.

Caps are used to cover the outside end of a copper pipe.

Tee Fittings are used to either combine or split fluid flow. They are also used to connect pipes of different diameters or for changing the direction of pipe runs.

Unions are similar to couplings and are used to connect two pieces of pipe together. However, a union is designed to allow quick and convenient disconnection of pipes for maintenance or fixture replacement.

We offer a wide selection of domestic Cello copper fittings for all your plumbing needs.

Product Details:

We are dealing with the finest quality of Copper Tube, which is used in the installation of medical gas pipeline systems. As we all know the medical gas pipeline system is the most crucial system of a hospital, keeping this in consideration, it should be well planned and designed following the proper international standards. Our piping products are one of the finest quality in the nation including the latest technology, we can assure a lifetime hassle-free copper piping solutions to our users. Moreover we also ensure better pricing and at the same time zero room for error. So we rightly say, "Where quality matters the most, we care most."

Product Details:

Our organization has successfully expanded its business in the market owing to the offered elevated quality array of Copper Sheet. Our offered sheet is highly acknowledged in the market for its various quality attributes. At vendors’ end, this sheet is manufactured using premium quality raw material and innovative technology. Furthermore, we provide this sheet in variegatedsizes and specifications according to the demands of our clients.

Features:

• Precise dimension
• Accurate design
• Rust free nature

Specifications:

• Thickness: 0.04mm to 200mm
• Standard size: 14" x 48", 16" x 48", 2" x 4", 1 mtr x 1 mtr, 8 feet x 4 feet & also we can Provide as per size.

Product Details:

Natural Steels is a leading Copper Alloy Pipes & Tubes manufacturer, Copper Alloy Pipes & Tubes exporters & Copper Alloy Pipes & Tubes suppliers. The Copper Pipes and Tubes that Numax Steel manufacture and export are highly appreciated by our clients because of their high strength and corrosion resistant. We provide the best quality of Copper pipes & tubes with high durability.

We also export Copper Alloy Pipes & Tubes to domestic as well as international markets and thus our products are made keeping the international standards in mind.

 

CUPRO NICKEL TUBES, CUPRO NICKEL PIPES, COPPER TUBING & COPPER PIPING MANUFACTURERS IN INDIA

 

 

UNS C70600 COPPER PIPES, CUPRO NICKEL UNS C71500 PIPES, CU-NI 70/30 WELDED PIPES, CU-NI 90/10 SEAMLESS PIPES SUPPLIER & EXPORTER IN INDIASPECIFICATIONS OF COPPER ALLOY PIPES & COPPER ALLOY TUBES

 

Copper Alloy Pipes & Tubes ASTM / ASME SB 111 UNS NO.C10100, Copper Alloy Pipes & Tubes ASTM / ASME SB 111 UNS NO.C10200, Copper Alloy Pipes & Tubes ASTM / ASME SB 111 UNS NO.C10300

Copper Alloy Pipes & Tubes ASTM / ASME SB 111 UNS NO. C10800, Copper Alloy Pipes & Tubes ASTM / ASME SB 111 UNS NO. C12000, Copper Alloy Pipes & Tubes ASTM / ASME SB 111 UNS NO. C12200

Copper Alloy Pipes & Tubes ASTM / ASME SB 111 UNS NO. C70600, Copper Alloy Pipes & Tubes ASTM / ASME SB 111 UNS NO. C71500.

 

 

COPPER NICKEL ALLOY PIPES & COPPER NICKEL ALLOY TUBES INDUSTRIAL APPLICATIONS

 

• Air conditioner & refrigeration
• Handling of Water tube service & distribution
• Handling of Fire Protection
• Handling of Solar, Fuel/Fuel Oil
• Handling of Natural Gas
• Handling of Liquefied Petroleum (LP) Gas
• Handling of HVAC, Drain, Vent Piping

• Re-drawing Use
• Heat Exchange Use
• Sanitary waste water drainage
• Wet central heating systems
• Under-floor heating

Product Details:

Keeping in mind the changing desires of our patrons, we are presenting a comprehensive collection of Copper Flat that is developed with accuracy. The entire range is designed making use of quality-assured components purchased from reliable sellers of the industry. Additionally, its exceptional built makes these products highly recommended.

Features:

• Reliable
• Durability
• Exceptional finish

Product Details:

Copper nickel offers excellent corrosion resistance, especially in marine salt water environments. The main, wrought copper- nickel alloys chosen for sea water service contain 10 or 30 percent nickel. They also have important additions of iron and manganese which are necessary to maintain good corrosion resistance. Some common applications for copper nickel include: valves, and pump components.

Product Details:

Keeping our synchronization with the development taking place in this industry, we are engrossed in delivering a broad range of Copper Alloy Sheets. Manufactured with precision, these products are highly recommended among our customers for its wonderful finish. 

Features:

• High quality
• Long lasting
• Seamless finish

Range: 5 mm to 100 mm thick in upto 2500 mm width & upto 6000 length available with NACE MR 01-75s.

Product Details:

We are engaged Manufacturers, Exporters and Supplier of high quality Cu-Ni ASTM B466 UNS C70600 90/10 Pipes & Tubes in mumbai, India. 

Product Details:

With the aid of adept and skillful personnel, we are affianced in presenting a qualitative gamut of Copper Pipes. In order to deliver faultless range to patrons, the accessible range is thoroughly examined on numerous parameters by our veteran quality examiners. In addition, offered products are highly acknowledged amid our patrons for durability.

Features:

• Sturdy
• Robust
• Durable

Product Details:

Beryllium Copper Rod are one of the highest strength copper based alloys available, it is also known as spring copper or beryllium bronze. The commercial grades of beryllium copper rods contain 0.4 to 2.0 percent beryllium. The small ratio of beryllium to copper creates a family of high copper alloys with strength as high as alloy steel. The first of the two families of copper beryllium rods C17200 and C17300. Tempered beryllium copper is beryllium copper C17200 rods & beryllium copper C17300 rods that has been age hardened and cold drawn. Copper beyllium c17200 rods & Copper beryllium c17300 rods includes high strength with moderate conductivity, while the second family, beryllium copper C17500 rod and beryllium copper C17510 offers high conductivity with moderate strength. Beryllium Copper C17510 rods & beryllium Copper C17500 rods are age-harden able and provide good electrical conductivity, physical properties, and endurance. They are used in springs and wire where electrical conduction or retention of properties at elevated temperatures is important. The principal characteristics of these alloys are their excellent response to precipitation-hardening treatments, excellent thermal conductivity, and resistance to stress relaxation

Product Details:

Our enterprise is betrothed in presenting an extensive variety of Copper Square Pipes. The presented product is made up at well-equipped fabrication unit in tandem with the set industry guidelines using optimum grade material and hi-tech technology. We assure our patrons that this product is quality examined against various predefined constraints. The offered product is accredited for its features such as durability.

Features:

• Reliable
• Long lasting nature
• Precise

Product Details:

Being the principal names in the industry, we are presenting an extensive variety of Copper Coil Pipe. At well-equipped fabrication unit, this product is developed using the optimal quality material and modern technology in synch with the set industry guidelines. Besides, the offered product is examined on numerous parameters of quality in order to deliver perfect range at the patrons’ end.
 
 Features:
 

• Optimum quality
• Longer life
• Fine finish