Incoloy Sheet

Product Details:

Other common names: Alloy 800, Alloy 800H/HT

Incoloy 800, 800H, and 800HT are nickel-iron-chromium alloys with good strength and excellent resistance to oxidation and carburization in high-temperature exposure. These nickel steel alloys are identical except for the higher level of carbon in alloy 800H, and the addition of up to 1.20 percent aluminum and titanium in alloy 800HT. Incoloy 800 was the first of these alloys and it was slightly modified into Incoloy 800H. This modification was to control carbon (.05-.10%) and grain size to optimize stress rupture properties. Incoloy 800HT has further modifications to the combined titanium and aluminum levels (.85-1.20%) to ensure optimum high temperature properties. The nickel alloy is dual certified (800H/HT) and combines the properties of both forms. Incoloy 800H/HT alloy was intended for high temperature structural applications. The nickel content makes the alloys highly resistant to both chloride stress-corrosion cracking and to embrittlement from precipitation of sigma phase. In the solution annealed condition, alloys 800H and 800HT have superior creep and stress rupture properties.

Incoloy 800 is primarily used in applications with temperatures up to 1100° F, where alloys 800H and 800HT are normally used in temperatures above 1100° F where resistance to creep and rupture is required. The chemical balance allows the nickel steel alloy to exhibit excellent resistance to carburization, oxidation and nitriding atmospheres. Incoloy 800HT will not become embrittled even after long periods of usage in the 1200-1600° F range where many stainless steels become brittle. Excellent cold forming characteristics typically associated with the nickel-chromium alloys are exhibited with 800HT. When cold formed extensively the grain size produces a visibly undulated surface called “orange peel”. Incoloy 800HT can be welded by the common techniques used on stainless steels.

In what forms is Incoloy® 800H/HT available at Natural Steels?

• Sheet
• Plate
• Bar
• Pipe & Tube (welded & seamless)
• Fittings i.e. flanges, slip-ons, blinds, weld-necks, lapjoints, long welding necks, socket welds, elbows, tees, stub-ends, returns, caps, crosses, reducers, nipples
• Wire

Alloy 800 (UNS N08800) Chemical Composition, %

Alloy 800H (UNS N08810) Chemical Composition, %

Alloy 800HT (UNS N08811) Chemical Composition, %

Product Details:

Specifications

• Type - Inconel Tube
• Material - Alloy
• Size - Customised

Inconel Tubes Grades
Inconel 600 Alloy Tubing 
Inconel 601 Alloy Tubing 
Inconel 617 Alloy Tubing 
Inconel 625 Alloy Tubing 
Inconel 718 Alloy Tubing 
Inconel 722 Alloy Tubing 
Inconel 750 Alloy Tubing 
Inconel 800 Alloy Tubing 
Inconel 800 Alloy Tubing 
Inconel 800h Alloy Tubing 
Inconel 800ht Alloy Tubing 
Inconel 803 Alloy Tubing 
Inconel 825 Alloy Tubing 
Inconel 864 Alloy Tubing 
Inconel 865 Alloy Tubing 
Inconel 903 Alloy Tubing 
Inconel 907 Alloy Tubing 
Inconel 909 Alloy Tubing

Product Details:

Other common names: Alloy 825

Incoloy 825 is a nickel-iron-chromium alloy with additions of molybdenum and copper. This nickel steel alloy’s chemical composition is designed to provide exceptional resistance to many corrosive environments. It is similar to alloy 800 but has improved resistance to aqueous corrosion. It has excellent resistance to both reducing and oxidizing acids, to stress-corrosion cracking, and to localized attack such as pitting and crevice corrosion. Alloy 825 is especially resistant to sulfuric and phosphoric acids. This nickel steel alloy is used for chemical processing, pollution-control equipment, oil and gas well piping, nuclear fuel reprocessing, acid production, and pickling equipment.

In what forms is Incoloy 825 available at Natural Steels?

• Sheet
• Plate
• Bar
• Pipe & Tube (welded & seamless)
• Fittings (i.e. flanges, slip-ons, blinds, weld-necks, lapjoints, long welding necks, socket welds, elbows, tees, stub-ends, returns, caps, crosses, reducers, and pipe nipples)
• Wire

What are the characteristics of Incoloy 825?

• Excellent resistance to reducing and oxidizing acids
• Good resistance to stress-corrosion cracking
• Satisfactory resistance to localized attack like pitting and crevice corrosion
• Very resistant to sulfuric and phosphoric acids
• Good mechanical properties at both room and elevated temperatures up to approximately 1020° F
• Permission for pressure-vessel use at wall temperatures up to 800°F

Alloy 825 (UNS N08825) Chemical Composition, %

Corrosion Resistance

Alloy 825 has a high level of corrosion resistance. It resists general corrosion, pitting, crevice corrosion, intergranular corrosion, and stress-corrosion cracking in both reducing and oxidizing environments.

In what applications is Incoloy 825 used?

• Chemical Processing
• Pollution-control
• Oil and gas well piping
• Nuclear fuel reprocessing
• Components in Pickling equipment like heating coils, tanks, baskets and chains
• Acid production

ASTM Specifications

General Mechanical Properties

Alloy 825 has good mechanical properties from cryogenic temperatures to moderately high temperatures. However, exposure to temperatures above 1000° F can result in microstructural changes that significantly lower ductility and impact strength. Alloy 825 should not be used at temperatures where creep-rupture properties are design factors.

Additional Information:

• Item Code: INCONEL825
• Production Capacity: 10TON
• Delivery Time: READY STOCK
• Packaging Details: AS PAR CUSTOMER REQUIERMENT

Product Details:

Inconel X750 is a nickel-chromium-molybdenum alloy designed to resist a wide range of severely corrosive environments, pitting and crevice corrosion. This nickel steel alloy also displays exceptionally high yield, tensile, and creep-rupture properties at high temperatures. This nickel alloy is used from cryogenic temperatures up to long term service at 1200° F. One of the distinguishing features of Inconel X750 composition is the addition of niobium to permit age hardening which allows annealing and welding without spontaneous hardening during heating and cooling. The addition of niobium acts with the molybdenum to stiffen the alloy’s matrix and provide high strength without a strengthening heat treatment. Other popular nickel-chromium alloys are age hardened through the addition of aluminum and titanium. This nickel steel alloy is readily fabricated and may be welded in either the annealed or precipitation (age) hardened condition. This super alloy is used in a variety of industries such as aerospace, chemical processing, marine engineering, pollution-control equipment, and nuclear reactors.

characteristics of Inconel X750

• Good mechanical properties – tensile, fatigue and creep-rupture

• Yield tensile strength, creep, and rupture strength properties are exceedingly high

• Highly resistant to chloride and sulfide stress corrosion cracking

• Resistant to aqueous corrosion and chloride ion stress corrosion cracking

• High temperature resistant

• Age-hardenable with a unique property of slow aging response that permits heating and cooling during annealing without the danger of cracking.